24999
Universal Remote
Instruction Manual
Introduction
Congratulations.on.your.purchase.of.this.24999.Universal.Remote.
Control..It.is.one.of.the.most.unique.looking,.and.easy.to.use.remote.
controls.available.today..Its.stylish.looking.blue.backlight,.and.metallic.
keypad.is.like.no.other.remote..With.the.24999.juggling.multiple.remote.
controls.is.a.thing.of.the.past!.Your.24999.Universal.Remote.controls.
up.to.8.devices,.including.the.most.popular.brands.of.TV,.VCR,.DVD,.SAT,.
CBL,.and.audio.equipment..
Note:.Some.functions.from.your.original.remote.may.not.be.controlled.
by.the.24999.remote..Use.the.original.remote,.if.available,.to.control.
such.functions..Sometimes.buttons.other.than.described.in.these.
instructions.may.actually.perform.the.function..For.example,.the.CHAN.
and.VOL.buttons.might.be.used.to.navigate.through.menu.choices..
We.recommend.you.experiment.with.the.remote.to.identify.if.such.
situations.pertain.to.your.equipment..
The.24999.Universal.Remote.is.easy.to.use,.easy.to.program,.and.it.
gives.you.total.control—at.the.touch.of.your.fingertips!
3
Button Functions
1.
26.
25.
24.
23.
22.
21.
20.
19.
18.
17.
16.
15.
14.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
Note:.The.REC button.must.be.pressed.TWICE.to.record.from.your.
device..For.some.brands.of.VCRs,.you.might.need.to.press.the.REC
button.once,.then.press.it.again.for.three.seconds.
Some.buttons.on.the.remote.might.have.functions.that.are.referred.
to.by.different.names.on.the.device.you.are.controlling..E.G..LAST.may.
be.called.RECALL,.or.ENTER may.be.called.DISPLAY..These.differences.
depend.on.the.brand.and.model.of.your.product..Also,.this.remote.can.
only.operate.features.that.exist.on.your.product..E.G.,.your.product.
must.have.LAST.ability.for.the.LAST button.to.operate.this.feature.
4
Button Functions, cont.
1. Liquid Crystal Display (LCD): Helps.with.setup.and.displays.the.
Mode.the.remote.is.in,.and.time,.etc.
2. SETUP: Used.for.setting.up.your.remote.
3. TV, DVD, DVR, etc.:.Selects.product.to.be.operated.
4. EXIT:.Exits.On-Screen.Menus/Returns.to.previous.On-Screen.
selection.
5. Dot:.Used.for.digital.channels,.e.g..2.3..
6. MENU: Brings.up.the.device.Menu.screen.(if.available).-.use.with.
UP,.DOWN,.LEFT,.and.RIGHT navigation.buttons.
7. MUTE: Turns.off.the.TV.sound.while.the.picture.remains.
8. . UP,.DOWN,.LEFT &.RIGHT: Navigation.buttons.
9. VOLUME UP/DOWN: Changes.the.volume.level.of.the.product,.
normally.the.TV.
10. OK: Selects.menu.items.for.the.device.you.are.controlling.
11. ABCD buttons:.Used.to.store.learned.commands.
12.. REPLAY: On.some.DVRs,.this.button.replays.the.last.8.seconds.of.a.
program.
13.. PAGE DOWN: Sets.your.Favorites.ratings,.and.moves.one.screen.
down.at.a.time.in.guides.and.menus.
14. RECORD, PLAY, STOP, REW, FF, PAUSE:.Control.buttons.that.
operate.your.DVD/DVR.even.when.the.remote.is.set.to.operate.the.
TV..Also.operates.DVD.Scan.-/+.
15. LIVE:.Returns.to.live.TV.
16.. PAGE UP:.Sets.your.Favorites.ratings,.and.moves.one.screen.up.at.
a.time.in.guides.and.menus.
17. INPUT: For.some.TVs,.press.repeatedly.to.select.available.viewing.
sources.(antenna,.cable.box,.VCR,.DVD,.etc.).
18. DVR List:.Press.to.display.list.of.recorded.shows.on.your.DVR.
19. CHANNEL UP/DOWN: Changes.the.channels..Also.controls.DVD/
CD.CHAPTER.+/-.track.selection,.i.e.,.DVD/CD.Track.Skip.Up/Down..
Note.the.DVR buttons.also.control.the.DVD.when.in.DVD.Mode.
20. LAST:.Returns.to.the.previously.selected.channel,.or.DVD.repeat.
toggle..
21. INFO: Displays/selects.on-screen.channel.information.
22. GUIDE:.Displays.on-screen.program.or.channel.guides.
23. ENTER:.Used.after.direct.channel.number.entry.to.immediately.
change.to.the.selected.channel.
24. NUMBERS:.Enter.numbers.for.direct.channel.selection..Some.
products.require.Enter.to.be.pressed.after.channel.selection.
25. ASPECT: Aspect.Ratio.Control.selects.viewing.format.for.the.
displayed.picture,.e.g.,.Wide,.Zoom,.etc.
26. POWER: Turns.device.on.or.off.
DVD/DVR Punch-Through Feature
This.remote.allows.the.6.DVD/DVR.transport.buttons.(i.e.,.PLAY,.PAUSE,.
STOP,.FF,.REWIND,.and.REC).to.operate.the.programmed.TV,.DVD,.
SAT,.DVR,.Cable.device.if.the.code.has.these.button.functions.e.g..if.
you.have.programmed.a.SAT/DVR.or.Cable/DVR,.etc..Otherwise.the.
transport.keys.will.punch-through.to.the.last.DVD.or.VCR.programmed.
mode.you.used,.i.e.,.the.transport.buttons.control.your.DVD.or.VCR.
player.even.when.you.are.in.TV,.SAT.or.Cable.mode.
5
Setup
Battery Installation
1..On.the.back.of.the.remote,.push.down.on.the.
tab.and.lift.the.cover.off.
2..Match.the.batteries.to.the.+.and.-.marks.inside.
the.battery.case,.then.insert.2.AAA.Alkaline.
batteries.
3..Press.the.battery.cover.back.into.place.
Battery Saver
Your.remote.automatically.turns.off.if.the.buttons.
are.depressed.more.than.30.seconds..This.will.
save.your.batteries.should.your.remote.get.stuck.
in.a.place.where.the.buttons.remain.depressed.
(e.g.,.between.the.sofa.cushions).
Code Saver
All.user.programmed.settings,.except.Time,.Day,.and.Date.will.be.stored.
in.permanent.memory.while.you.are.changing.batteries,.so.you.will.not.
lose.any.codes.stored.in.the.remote.while.you.are.changing.batteries..
Time,.Day,.and.Date,.will.be.cleared.to.the.factory.defaults.when.the.
batteries.are.replaced.
Power-On Default
The.remote.powers.on.in.TV.mode.
Liquid Crystal Display (LCD).
The.LCD.lets.you.see.at.a.glance.what.mode.the.remote.is.in..It.also.
includes.a.clock.that.displays.the.time.and.day,.and.a.visual.indication.
that.the.remote.is.transmitting.when.you.press.a.button.
Code Setup
The.SETUP.button.is.used.to.setup.the.remote..You.can.either.setup.the.
remote.using.the.code.for.your.brand.of.product,.from.the.code.tables.
(on.separate.sheet),.or.you.can.search.through.the.library.of.codes.until.
you.find.a.code.that.works.for.your.product.
You.can.store.any.kind.of.code.under.any.mode.(except.TV)..I.E..you.can.
store.a.VCR.code.under.the.CBL button,.or.a.DVD.code.under.the.VCR
button,.etc..However,.you.can.only.store.TV.codes.under.the.TV button.
The SETUP button.is.used.for.programming.the.remote.and.accessing.
any.additional.features.-.e.g..Shifted.functions,.see.below..To.enter.setup.
mode,.press.and.hold.the.SETUP button.until.“CODE.SETUP”.appears.in.
the.display..The.“SET”.symbol.will.always.be.shown.when.the.remote.is.
in.Setup..Successive.presses.of.the.SETUP button.shows.available.Setup.
options.in.the.order.shown.below..
1..CODE.SETUP.–.press.OK here.to.program.a.Mode.e.g..Code.Entry,.
Search,.etc..See.Code.Setup.options.below.
2..SYSTEM.SETUP.–.press.OK here.to.set.Time,.Date,.Volume.Control,.etc..
3..TIMER.SETUP.–.press.OK here.to.set.Timer.events.
4..LEARN.SETUP.–.press.OK here.to.program.a.Mode.with.Learned.
commands.
5..EXIT.SETUP.–.press.OK here.to.Exit.Setup.routines.and.return.to.
normal.operation.
Press.OK to.select.the.desired.programming.step.required..
Exit.from.Setup.occurs.automatically.after.approximately.15.seconds.if.
no.buttons.is.pressed..TIME.OUT.is.displayed.
When.the.remote.is.busy.processing.in.Setup.routines,.“Please.Wait”.is.
displayed.
6
Setup, cont.
Setup Screen Navigation.Use.the.SETUP,.OK,.and.Up,.Down,.Left.and.
Right.navigation.buttons.for.Setup.screen.navigation.and.selection..
To.exit.the.Setup.routines.and.return.to.normal.operation,.press.the.
EXIT button.or.navigate.to.the.“EXIT.SETUP”.screen.and.press.OK..
Completion.of.some.Setup.routines.will.automatically.return.the.remote.
to.normal.operation.
Mode button press Display.Pressing.and.holding.a.Mode.button.
changes.to.that.Mode.and.displays.the.active.Mode.and.its.code,.e.g.,.
DVD.and.the.programmed.4-digit.code.e.g.,.0768..The.display.returns.to.
normal.when.you.release.the.button.
SETUP (Shift) Display.Pressing.and.releasing.the.Setup.button.displays.
the.active.Mode.of.the.remote.e.g..DVD,.the.Date.e.g..3:26.(Month:Day).
and.indicates.“Shift”.operation.with.“(S)”..Press.and.release.Exit.to.return.
to.normal.display..To.use.the.SETUP button.for.Shift.-.Press.and.release.
SETUP followed.by.the.desired.secondary.function.button.
7
Code Entry
Code Setup Options:.Pressing.OK at.the.CODE.SETUP.screen.presents.
3.options.for.programming.a.Mode.with.codes..These.are.LIST.CODES.
(lets.you.enter.a.4.digit.code.from.the.on-screen.code.list),.ENTER.CODES,.
(lets.you.enter.a.4.digit.code.directly.from.the.printed.code.list).SEARCH.
CODES,.(lets.you.search.through.the.codes.stored.in.the.remote.to.find.
the.correct.one.for.your.device).
Code Entry using On-screen Code List
1..Manually.turn.on.the.device.to.be.controlled.
2..Press.and.hold.the.SETUP button.until.CODE.SETUP.is.displayed.
(takes.about.3.seconds),.then.release.the.SETUP button.
3..Press.and.release.OK..LIST.CODES.is.displayed.
4..Press.and.release.OK..MODE.KEY?.is.displayed.
5..Press.and.release.the.desired.mode.button.(TV,.VCR,.DVD,.etc.)..The.
Mode.is.displayed.along.with.its.currently.programmed.code..
6..Using.the.UP/DOWN.buttons,.select.the.Device.type.to.be.
programmed.(TV,.VCR,.DVD,.etc..Note - For TV Mode, only a TV
Device can be selected.
7..Press.and.release.OK to.confirm.selection..
8..The.Code.List.Brand.and.Code.will.now.be.displayed.(e.g..Admiral.
0000)..Use.the.UP/DOWN.buttons.to.select.the.Brand.and.LEFT/
RIGHT.buttons.to.select.the.Code..Codes.can.be.tested.on.your.
device.using.VOLUME, MUTE, CHANNEL, POWER, INPUT, PLAY,
STOP, FF, REWIND and.PAUSE. Once.the.correct.code.has.been.
found,.press.and.release.OK to.install.the.Code..
9..PLEASE.WAIT.is.briefly.displayed,.followed.by.SUCCESS.and.the.
remote.returns.to.normal.operation..
10..With.your.device.on,.press.CHANNEL UP..If.the.device.responds,.
no.further.programming.is.required..Note:.If.some.buttons.do.not.
operate.your.equipment,.try.one.of.the.other.codes.for.your.brand.
of.device..
Direct Code Entry
1..Manually.turn.on.the.device.to.be.controlled.
2..Press.and.hold.the.SETUP.button.until.CODE.SETUP.is.displayed.
(takes.about.3.seconds),.then.release.the SETUP.button.
3..Press.and.release.OK..LIST.CODES.is.displayed.
4..Press.the.DOWN navigation.button.until.ENTER.CODES.is.displayed..
5..Press.and.release.OK..MODE.KEY?.is.displayed.
6..Press.and.release.the.desired.mode.button.(TV, VCR,.DVD,.etc.)..The.
Mode.is.displayed.along.with.its.currently.programmed.code.
7..Enter.the.4.digit.code.from.the.code.tables.(on.separate.sheet)..After.
the.4th.digit.is.entered.SUCCESS.is.displayed.and.the.remote.returns.
to.normal.operation..
If.an.invalid.code.is.entered,.CODE.ERROR.is.shown.in.the.display.and.
the.remote.returns.to.normal.operation..
8..With.your.device.on,.press CHANNEL UP..If.the.device.responds,.
no.further.programming.is.required..Note:.If.some.buttons.do.not.
operate.your.equipment,.try.one.of.the.other.codes.for.your.brand.
of.device.
8
Code Entry, cont.
Searching for Codes
If.your.product.does.not.respond.after.you.have.tried.all.the.codes.for.
your.brand,.or.if.your.brand.is.not.listed,.try.searching.for.your.code.by.
following.these.steps.
1..Manually.turn.on.the.device.(TV,.VCR,.DVD,.etc.).to.be.controlled.
2..Press.and.hold.the.SETUP.button.until.CODE.SETUP.is.displayed.
(takes.about.3.seconds),.then.release.the SETUP.button.
3..Press.and.release.OK..LIST.CODES.is.displayed.
4..Press.the.down.navigation.button.repeatedly.until.SEARCH.CODES.is.
displayed.
5..Press.and.release.OK..MODE.KEY.is.displayed.
6..Press.and.release.the.desired.mode.button.(TV, VCR,.DVD,.etc.)..
DEVICE?.TV.is.displayed.
7..Using.the.Up/Down.keys,.select.the.Device.type.to.be.programmed.
(TV,.VCR,.DVD,.etc..Note - For TV Mode, only a TV Device can be
selected.
8..Press.and.release.OK to.confirm.selection..SEARCH.KEY?.is.displayed..
9..Press.the.CHANNEL UP.button.(or.POWER,.or.PLAY for.VCRs/
DVDs).repeatedly.(up.to.300.times).until.the.Device.to.be.controlled.
changes.channel,.turns.off.or.responds.accordingly..SEARCHING.
is.displayed.(along.with.the.Device.selection).during.the.search.
process..If.the.desired.Code.is.accidentally.passed.then.press.the.
CHANNEL DOWN.button.to.backtrack.through.the.Library..Press.
CHANNEL UP.(or.POWER.or.PLAY).to.change.direction.forward.again..
10..Press.and.release.OK to.install.the.Code..PLEASE.WAIT.is.briefly.
displayed,.followed.by.SUCCESS.and.the.remote.returns.to.normal.
operation.
Notes:
1..If.the.Device.does.not.have.a.CHANNEL UP button,.use.PLAY (VCR/DVD).
or.the.POWER button.instead.
2..Code.Search.starts.from.the.currently.stored.4-digit.number.under.
that.Mode.
3..When.all.codes.have.been.searched.SEARCH.END.is.displayed.and.
remote.returns.to.normal.operation.
Code Identification Feature
Press.and.hold.the.respective.Mode.key.in.normal.operation.to.display.
the.programmed.code.for.that.Mode.e.g.,.DVD.Code.0768.
Programming Combo Device Codes
Some.combo.(combination).devices.(TV/DVR,.TV/DVD,.DVD/DVR,.etc.).
require.you.to.set.up.2.different.modes.to.control.both.parts.of.the.
combo..For.example,.if.you.have.a.TV/DVD.combo,.you.might.need.to.
set.up.one.code.under.the.TV.mode.to.control.the.TV.and.a.separate.
code.(under.other.modes).to.control.the.DVD.
9
Setup, cont.
System Setup Options
Pressing.OK at.the.SYSTEM.SETUP.screen.accesses.the.System.Setup.
Options.for.Volume.Punch-Through.control.Setup,.Time.Setup,.Date.Setup,.
Backlight.Setup.and.System.Reset.
Volume/Mute Control and Punch-Through Feature
Your.remote.allows.you.to.select.which.device.mode.controls.VOLUME.
and.MUTE..This.remote.is.initially.set.for.all.device.modes.to.use.their.
own.Volume/Mute.control.if.present..If.the.programmed.code.does.not.
have.Volume/Mute.operation,.then.VOLUME.and.MUTE.will.“punch-
through”.(hand-over).control.to.the.TV.mode.device.without.you.
needing.to.change.to.TV.mode..Note:.Any.mode.chosen.for.Volume/
Mute.control.must.have.its.own.Volume/Mute.function.or.else.VOLUME.
and.MUTE.will.not.function.
Setting ALL Volume/Mute Control to any one Mode (ALL VOL. SET)
This.routine.can.set.all.Modes.to.“punch-through”.to.any.one.chosen.
Mode.for.Volume/Mute.button.control.without.needing.to.change.to.
that.Mode.
1..Press.and.hold.the.SETUP.button.until.CODE.SETUP.is.displayed.
(takes.about.3.seconds),.then.release.the SETUP.button.
2..Press.the.down.navigation.button.until.SYSTEM.SETUP.is.displayed..
3..Press.and.release.OK..VOL/MUTE.SETUP.is.displayed.
4..Press.and.release.OK..ALL.VOL..SET.is.displayed.
5..Press.and.release.OK..ALL.VOL..MODE?.is.displayed.
6..Press.and.release.desired.Mode.key.(TV,.VCR,.DVD,.etc.).for.Volume/
Mute.control..PLEASE.WAIT.is.briefly.displayed,.followed.by.SUCCESS.
and.the.remote.returns.to.normal.operation.
All.Modes.will.now.punch-through.to.your.chosen.Mode.for.Volume/
Mute.control..If.the.chosen.Mode.has.no.Volume/Mute.commands.of.its.
own,.“Volume.Error”.is.shown.in.the.display.and.the.remote.returns.to.
normal.operation..
Setting any Mode to use its own Volume/Mute Control (MODE VOL.
SET)
This.sets.any.Mode.to.use.only.its.own.Volume/Mute.control,.i.e..
Volume/Mute.punch-through.is.disabled.for.this.Mode..Note.-.If.your.
chosen.Mode.has.no.Volume/Mute.functions.of.its.own.then.the.
Volume/Mute.buttons.will.do.nothing.
1..Press.and.hold.the.SETUP.button.until.CODE.SETUP.is.displayed.
(takes.about.3.seconds),.then.release.the SETUP.button.
2..Press.the.down.navigation.button.until.SYSTEM.SETUP.is.displayed..
3..Press.and.release.OK..VOL/MUTE.SETUP.is.displayed.
4..Press.and.release.OK..ALL.VOL..SET.is.displayed.
5..Press.the.down.navigation.button.until.MODE.VOL..SET.is.displayed.
6..Press.and.release.OK..MODE.VOL..MODE?.is.displayed.
7..Press.and.release.desired.Mode.key.(TV,.VCR,.DVD,.etc.).to.be.disabled.
for.Volume/Mute.punch-through.control..PLEASE.WAIT.is.briefly.
displayed,.followed.by.SUCCESS.and.the.remote.returns.to.normal.
operation.
The.chosen.Mode.will.now.use.its.own.Volume/Mute.control.
10
Setup, cont.
Resetting Volume/Mute Control to Factory Defaults (VOL/MUTE
RESET) This.resets.Volume/Mute.control.back.to.its.Factory.default.
settings..
1..Press.and.hold.the.SETUP.button.until.CODE.SETUP.is.displayed.
(takes.about.3.seconds),.then.release.the SETUP.button.
2..Press.the.down.navigation.button.until.SYSTEM.SETUP.is.displayed..
3..Press.and.release.OK..VOL/MUTE.SETUP.is.displayed.
4..Press.and.release.OK..ALL.VOL..SET.is.displayed.
5..Press.the.down.navigation.button.repeatedly.until.VOL/MUTE.RESET.
is.displayed.
6..Press.and.release.OK..CONFIRM.RESET.is.displayed.
7..Press.and.release.OK..PLEASE.WAIT.is.briefly.displayed,.followed.by.
SUCCESS.and.the.remote.returns.to.normal.operation.
Volume/Mute.control.is.now.rest.to.its.Factory.default.settings.
11
Setup, cont.
Setting the Time of Day (TIME SETUP) To.set.the.Time.of.day.for.normal.
LCD.time.display..
1..Press.and.hold.the.SETUP.button.until.CODE.SETUP.is.displayed.
(takes.about.3.seconds),.then.release.the SETUP.button.
2..Press.the.down.navigation.button.until.SYSTEM.SETUP.is.displayed..
3..Press.and.release.OK..VOL/MUTE.SETUP.is.displayed.
4..Press.the.down.navigation.button.until.TIME.SETUP.is.displayed.
5..Press.and.release.OK..TIME?.is.displayed.showing.current.format.(12.
or.24.hour).flashing.and.current.time.
6..Use.the.Up/Down.navigation.buttons.to.set.the.format.(12Hr.or.24Hr).
then.press.and.release.OK.
7..The.“hours”.will.be.flashing..Use.the.Up/Down.buttons.to.set.the.hours.
(keep.going.past.12.to.select.PM.hours).then.press.and.release.OK..
8..The.“minutes”.will.be.flashing..Use.the.Up/Down.buttons.to.set.the.
minutes.then.press.and.release.OK.
9..SUCCESS.is.displayed..The.remote.remains.in.Setup.Mode,.returning.to.
the.CODE.SETUP.screen..Press.EXIT then.OK to.exit.Setup.Mode..PLEASE.
WAIT.is.briefly.displayed,.then.the.remote.returns.to.normal.operation.
Setting the Date (DATE SETUP) To.set.the.Month,.Date.and.Day..
1..Press.and.hold.the.SETUP.button.until.CODE.SETUP.is.displayed.(takes.
about.3.seconds),.then.release.the SETUP.button.
2..Press.the.down.navigation.button.until.SYSTEM.SETUP.is.displayed..
3..Press.and.release.OK..VOL/MUTE.SETUP.is.displayed.
4..Press.the.down.navigation.button.repeatedly.until.DATE.SETUP.is.
displayed..
5..Press.and.release.OK..YEAR?.is.displayed.with.the.last.2.year.digits.
flashing..
6..Use.the.Up/Down.buttons.to.set.the.Year.then.press.and.release.OK.
7..MONTH?.is.displayed.with.the.Month.digits.flashing..Use.the.Up/Down.
buttons.to.set.the.Month.then.press.and.release.OK.
8..DATE?.is.displayed.with.the.Date.digits.flashing..Use.the.Up/Down.
buttons.to.set.the.Date.then.press.and.release.OK.
9..DAY?.is.displayed.with.the.Day.flashing..Use.the.Up/Down.buttons.to.
set.the.Day.then.press.and.release.OK.
10..SUCCESS.is.displayed,.and.the.remote.remains.in.Setup.Mode,.returning.
to.the.CODE.SETUP.screen..Press.EXIT then.OK to.exit.Setup.Mode..
PLEASE.WAIT.is.briefly.displayed,.then.the.remote.returns.to.normal.
operation.
12
Setup, cont.
Setting the Backlighting On time (BACKLIGHT SETUP).To.set.the.length.
of.time.the.Backlighting.remains.on.after.you.stop.pressing.buttons.
1..Press.and.hold.the.SETUP.button.until.CODE.SETUP.is.displayed.(takes.
about.3.seconds),.then.release.the SETUP.button.
2..Press.the.down.navigation.button.until.SYSTEM.SETUP.is.displayed..
3..Press.and.release.OK..VOL/MUTE.SETUP.is.displayed.
4..Press.the.down.navigation.button.repeatedly.until.BACKLIGHT.SETUP.
is.displayed..Press.and.release.OK.
5..BACKLIGHT.TIME?.is.displayed.with.the.current.Backlight.On.time.digits.
flashing..Use.the.Up/Down.buttons.to.set.the.Backlight.On.time.in.
increments.of.5.seconds.up.to.a.maximum.of.60.seconds..The.default.
Backlight.On.time.is.10.seconds..To.turn.the.Backlighting.feature.off,.
set.the.time.to.“00”.(zero)..Press.and.release.OK.
6..SUCCESS.is.displayed.and.the.remote.remains.in.Setup.Mode,.returning.
to.the.CODE.SETUP.screen..Press.EXIT then.OK to.exit.Setup.Mode..
PLEASE.WAIT.is.briefly.displayed,.then.the.remote.returns.to.normal.
operation.
Reset the LCD Remote to Factory Defaults (SYSTEM RESET) To.reset.
the.remote.back.to.factory.default.settings..All.User.programmed.
settings,.e.g..code.settings,.learned.commands,.etc.,.are.cleared.to.their.
respective.default.settings..
1..Press.and.hold.the.SETUP.button.until.CODE.SETUP.is.displayed.(takes.
about.3.seconds),.then.release.the SETUP.button.
2..Press.the.down.navigation.button.until.SYSTEM.SETUP.is.displayed..
3..Press.and.release.OK..VOL/MUTE.SETUP.is.displayed.
4..Press.the.down.navigation.button.repeatedly.until.SYSTEM.RESET.is.
displayed..Press.and.release.OK.
5..CONFIRM.RESET.is.displayed..Press.and.release.OK.
6..PLEASE.WAIT.is.displayed.while.all.settings.are.Reset.then.the.remote.
exits.Setup.and.returns.to.normal.operation.
13
Setup, cont.
Timer Setup
Pressing.OK at.TIMER.SETUP.accesses.the.available.Timer.Options..
These.are.a.TV.Sleep.Timer.and.4.Timers.that.can.send.a.sequence.of.
up.to.3.key.commands.at.the.preset.time.
Setting and Clearing a TV Sleep Timer (TV Sleep Setup)
The.remote.can.be.programmed.with.a.TV.Sleep.Timer..At.the.end.of.
the.set.Timer.period,.the.remote.sends.the.Power.command.for.the.
TV.Mode.device..The.TV.Sleep.Timer.can.be.set.for.a.period.of.1-90.
minutes..The.“Zzz”.symbol.is.displayed.when.a.TV.Sleep.Timer.is.set.
To set a TV Sleep Timer (no “Zzz” in normal display)
1..Turn.on.the.TV.Mode.device.
2..Press.and.hold.the.SETUP.button.until.CODE.SETUP.is.displayed.(takes.
about.3.seconds),.then.release.the SETUP.button.
3..Press.the.down.navigation.button.repeatedly.until.TIMER.SETUP.is.
displayed..Press.and.release.OK.
4..TV.SLEEP.SETUP.is.displayed..Press.and.release.OK.
5..TV.SLEEP.SET.is.displayed..Press.and.release.OK.
6..TV.SLEEP.TIME?.is.displayed.with.“minutes”.flashing..Use.the.Up/Down.
buttons.to.set.the.minutes.then.press.and.release.OK.
7..SUCCESS.is.displayed..The.remote.remains.in.Setup.Mode,.returning.to.
the.CODE.SETUP.screen..Press.EXIT then.OK to.exit.Setup.Mode..PLEASE.
WAIT.is.briefly.displayed,.then.the.remote.returns.to.normal.operation..
Zzz.is.displayed.on.the.screen.to.indicate.that.a.Sleep.Timer.is.set.
To clear a TV Sleep Timer (“Zzz” in normal display)
1..Press.and.hold.the.SETUP.button.until.CODE.SETUP.is.displayed.(takes.
about.3.seconds),.then.release.the SETUP.button.
2..Press.the.down.navigation.button.repeatedly.until.TIMER.SETUP.is.
displayed..Press.and.release.OK.
3..TV.SLEEP.SETUP.is.displayed..Press.and.release.OK.
4..TV.SLEEP.CLEAR.is.displayed..Press.and.release.OK.
5..CONFIRM.CLEAR.is.displayed..Press.and.release.OK.
6..SUCCESS.is.displayed.and.the.remote.remains.in.Setup.Mode,.returning.
to.the.CODE.SETUP.screen..Press.EXIT then.OK to.exit.Setup.Mode..
PLEASE.WAIT.is.briefly.displayed,.then.the.remote.returns.to.normal.
operation.
Setting and Clearing Timers (TIMER SETUP)
The.remote.can.be.programmed.with.up.to.4.Timers.(Timer.1,.2,.3.&.4)..
Each.Timer.can.be.assigned.up.to.2.keys.to.activate.at.the.set.time..The.
first.key.must.always.be.a.Mode.key..Subsequent.keys.cannot.include.
Up,.Down,.Left,.Right,.OK,.Exit,.Setup.or.any.Mode.key..Timers.can.only.
activate.within.the.following.24-hour.period..Timers.are.automatically.
cleared.after.activation..The.“Timer.Bell”.symbol.is.displayed.when.any.
Timer.is.set.
14
Setup, cont.
To set a Timer (Note, the Timer must be cleared first if it was previously
set – see To Clear a Timer below)
1.. Press.and.hold.the.SETUP.button.until.CODE.SETUP.is.displayed.(takes.
about.3.seconds),.then.release.the SETUP.button.
2.. Press.the.down.navigation.button.repeatedly.until.TIMER.SETUP.is.
displayed..
3.. Press.and.release.OK..TV.SLEEP.SETUP.is.displayed..
4.. Press.the.down.navigation.button.until.TIMER.X.SETUP.is.displayed.
(where.“X”.is.1,.2,.3.or.4)..Press.and.release.OK.
5.. TIMER.X.SET.is.displayed..Press.and.release.OK.
6.. TIMER.X.TIME?”.is.displayed.with.the.“hours”.flashing..Use.the.Up/Down.
buttons.to.set.the.hours.(keep.going.past.12.to.select.PM.times).then.
press.and.release.OK.
7.. The.“minutes”.will.be.flashing..Use.the.Up/Down.buttons.to.set.the.
minutes.then.press.and.release.OK.
8.. TIMER.X.MODE?.is.displayed..Press.and.release.the.desired.Mode.key.
(TV,.VCR,.DVD,.etc.).
9.. TIMER.X.Key1?.is.displayed..Press.and.release.the.key.required.(e.g..
POWER).
10.. SUCCESS.is.displayed..The.remote.remains.in.Setup.Mode,.returning.to.
the.CODE.SETUP.screen..Press.EXIT then.OK to.exit.Setup.Mode..PLEASE.
WAIT.is.briefly.displayed,.then.the.remote.returns.to.normal.operation..
A.“Timer.Bell”.is.displayed.on.the.screen.to.indicate.that.a.timer.is.set.
To clear a Timer (“Timer Bell” in normal display)
1.. Press.and.hold.the.SETUP.button.until.CODE.SETUP.is.displayed.(takes.
about.3.seconds),.then.release.the SETUP.button.
2.. Press.the.down.navigation.button.repeatedly.until.TIMER.SETUP.is.
displayed..
3.. Press.and.release.OK..TV.SLEEP.SETUP.is.displayed..
4.. Press.the.down.navigation.button.until.the.desired.TIMER.X.SETUP.is.
displayed.(where.“X”.is.1,.2,.3.or.4).screen..Press.and.release.OK.
5.. TIMER.X.CLEAR.is.displayed..Press.and.release.OK.
6.. CONFIRM.CLEAR.is.displayed..Press.and.release.OK.
7.. SUCCESS.is.displayed..The.remote.remains.in.Setup.Mode,.returning.to.
the.CODE.SETUP.screen..Press.EXIT then.OK to.exit.Setup.Mode..PLEASE.
WAIT.is.briefly.displayed,.then.the.remote.returns.to.normal.operation.
15
Code Learning
Tips On Learning
You.can.only.learn.one.device.type.under.any.one.Mode.button.e.g..
only.learn.TV.codes.under.the.TV Mode,.DVD.codes.under.the.DVD
Mode,.etc..If.you.are.trying.to.learn.from.a.“Universal”.remote,.it.might.
have.more.than.one.code.type.stored.under.a.Mode..Try.learning.from.
another.remote.to.see.if.there’s.a.problem.with.the.type.or.brand.of.
remote.you.are.trying.to.learn.from..
a. Some functions from some types of remotes might not be able to
be learned.
b. No functions may be stored under the SETUP button.
c. Only one original device type can be learned per individual Mode.
d. Use.fresh.batteries.for.both.the.Learning.Remote.and.the.Original.
Remote.
e. Do.not.attempt.to.Learn.directly.under.an.incandescent.or.
low-energy.light.as.these.can.cause.interference.with.the.IR.
transmissions..Keep.at.least.3.feet.away.from.any.such.light.sources.
f. Perform.a.Master.Clear.(see.page.22).before.learning.and.try.learning.
2.or.3.commands.initially..Then.carry.out.a.Master.Clear.before.
completely.learning.your.original.remote’s.commands.
g..Carry.out.a.“Mode.Clear”.before.learning.a.Mode.to.make.sure.there.
are.no.previously.learned.commands.for.that.Mode.
h. Place.the.original.remote.end-to-end.with.the.Learning.Remote.so.
the.IR.transmitters.on.both.remotes.are.directly.in.line.with.each.
other..You.may.need.to.adjust.the.height.of.either.remote.to.achieve.
this..
i. Keep.the.distance.between.the.two.remotes.to.approximately.1.inch.
and.do.not.move.or.change.the.distance.between.the.two.remotes.
until.you.have.learned.all.the.required.buttons.for.that.Mode.
j. Avoid.learning.your.original.remote.Volume/Mute.buttons.unless.
you.are.sure.these.operate.the.same.device.e.g..some.original.DVD.
remotes.include.TV.Volume/Mute.button.control.and.can.be.two.
different.types.of.code.
k. Avoid.learning.your.original.remote.VCR.or.DVD.buttons.unless.
you.are.sure.these.operate.the.same.device.e.g..some.original.TV.
remotes.include.VCR.or.DVD.button.control.and.can.be.two.different.
types.of.code.
l..Learning.a.button.can.take.up.to.3.seconds..Do.not.release.the.button.
being.Learned.until.SUCCESS.or.LEARN.ERROR.has.been.displayed.
16
Tips On Learning, cont.
Tips On Learning, cont.
m. If.learning.the.first.or.second.buttons.for.a.Mode.results.in.
continuous.errors.then.try.the.following:
i... End.the.Learn.session.by.pressing.the.EXIT button.
ii...Clear.out.the.learned.commands.for.that.Mode.
iii...Check.the.IR.transmitters.are.correctly.aligned.between.the.two.
remotes.
iv...Adjust.the.distance.between.the.two.remotes.to.be.closer.(e.g..
half.an.inch).or.a.further.away.(e.g..2.inches).from.each.other.
v...Try.learning.the.original.remote.for.that.Mode.again.
If.problems.reoccur.with.the.same.button.check.the.original.remote.
button.being.learned.–.does.it.transmit?.Does.it.operate.the.target.
device?.Try.learning.that.button.under.a.different clear.Mode..If.it.learns.
okay.then.it.is.likely.to.be.a.different.code.type.from.the.others.and.
cannot.be.learned.under.the.same.Mode.
Learning Notes
1.. You.cannot.learn.under.the.Setup.button.
2.. All.learned.commands.for.a.Mode.are.deleted.if.the.same.or.a.new.
4-digit.code.is.entered.for.that.Mode.by.any.Code.Entry.or.Code.
Search.
3.. The.Backlighting.is.turned.off.for.Learning.
17
Learning Commands
1..Press.and.hold.the.SETUP.button.until.CODE.SETUP.is.displayed.(takes.
about.3.seconds),.then.release.the SETUP.button.
2..Press.the.down.navigation.button.repeatedly.until.LEARN.SETUP.is.
displayed..Press.and.release.OK.
3..MODE.LEARN.is.displayed..Press.and.release.OK.
4..MODE.KEY?.is.displayed..Press.and.release.the.desired.Mode.button.
(TV,.VCR,.DVD,.etc.).
5..LEARN.KEY?.is.displayed..Press.and.release.the.key.on.the.24999.remote.
that.you.want.to.be.taught.a.code,.e.g..POWER.
6..LEARNING.is.displayed..Pointing.the.remotes.as.shown.below,.press.
and.hold.the.original.remote.key.(e.g..POWER).until.the.SUCCESS.or.
LEARN.ERROR.is.displayed.(see.Tips.on.Learning,.page.19).followed.by.
LEARN.MORE?.(this.process.can.take.up.to.2.or.3.seconds.to.complete)..
Release.the.original.remote.button.
7..LEARN.MORE?.is.still.displayed..To.learn.more.buttons,.press.and.release.
OK and.repeat.from.step.5..To.exit.at.this.point,.press.and.release.EXIT.
8..PLEASE.WAIT.is.displayed.briefly.and.the.remote.exits.Setup.Mode.and.
returns.to.normal.operation.
Line.up.your.remotes.(that.you’re.learning.from).in.front.of.the.Learning.
remote,.on.a.hard.surface.approx..1.inch.apart.
18
Clearing Commands
To Clear all Learned Commands under a mode
Clearing.learned.commands.is.helpful.if,.for.example,.you.replace.your.
CD.player.with.another.brand.or.model..If.you.had.learned.a.feature.
from.your.old.CD.player’s.original.remote.on.to.this.remote.(such.as.
RANDOM.PLAY),.that.feature.would.no.longer.work.for.your.new.CD.
player..Should.you.wish.to.remove.or.clear.one.or.more.“learned”.
commands,.follow.the.steps.below:
1.. Press.and.hold.the.SETUP.button.until.CODE.SETUP.is.displayed.(takes.
about.3.seconds),.then.release.the SETUP.button.
2.. Press.the.down.navigation.button.repeatedly.until.LEARN.SETUP.is.
displayed..Press.and.release.OK..MODE.LEARN.is.displayed.
3.. Press.the.down.navigation.button.until.MODE.CLEAR.is.displayed..Press.
and.release.OK.
4.. MODE.KEY?.is.displayed..Press.and.release.the.desired.Mode.button.
(TV,.VCR,.DVD,.etc.).
5.. CONFIRM.CLEAR.is.displayed..Press.and.release.OK.
6.. PLEASE.WAIT.is.briefly.displayed.followed.by.SUCCESS.and.the.remote.
exits.Setup.Mode.and.returns.to.normal.operation.
Master Clear - To Clear all Learned Commands under all modes
(recommended on first time Learning)
1.. Press.and.hold.the.SETUP.button.until.CODE.SETUP.is.displayed.(takes.
about.3.seconds),.then.release.the SETUP.button.
2.. Press.the.down.navigation.button.repeatedly.until.LEARN.SETUP.is.
displayed..Press.and.release.OK..MODE.LEARN.is.displayed.
3.. Press.the.down.navigation.button.repeatedly.until.ALL.LEARN.CLEAR.
is.displayed..Press.and.release.OK.
4.. CONFIRM.CLEAR.is.displayed..Press.and.release.OK.
5.. PLEASE.WAIT.is.briefly.displayed.followed.by.SUCCESS.and.the.remote.
exits.Setup.Mode.and.returns.to.normal.operation.
19
Troubleshooting
Remote does not operate your product.
•.Press.the.mode.button.of.the.product.you.want.to.control.
•.Program.the.remote.with.a.new.code.
•.Install.new.batteries..(You.might.have.to.reprogram.your.remote.after.
installing.new.batteries.)
•.Remote.may.not.be.compatible.with.your.product.
Remote does not operate some features of your product.
•.Program.remote.with.a.new.code.
•.Remote.may.not.be.able.to.operate.all.features.of.your.product.or.
button.names.might.be.different.than.your.product.
Lost Your Codes?
Should.you.lose.your.codes.or.programming.instructions,.you.can.find.
available.on.our.website:
www.jascoproducts.com
This device complies with part 15 of the FCC rules. Operation is
subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
FCC NOTE: The manufacturer is not responsible for any radio or
TV interference caused by unauthorized modifications to this
equipment. Such modifications could void the user’s authority to
operate the equipment.
90 Day Limited Warranty
Jasco.Products.Company.warrants.this.product.to.be.free.from.
manufacturing.defects.for.a.period.of.ninety.days.from.the.original.
date.of.consumer.purchase..This.warranty.is.limited.to.the.repair.or.
replacement.of.this.product.only.and.does.not.extend.to.consequential.
or.incidental.damage.to.other.products.that.may.be.used.with.this.
unit..This.warranty.is.in.lieu.of.all.other.warranties.express.or.implied..
Some.states.do.not.allow.limitations.on.how.long.an.implied.warranty.
lasts.or.permit.the.exclusion.or.limitation.of.incidental.or.consequential.
damages,.so.the.above.limitations.may.not.apply.to.you..This.warranty.
gives.you.specific.rights,.and.you.may.also.have.other.rights.which.vary.
from.state.to.state..If.unit.should.prove.defective.within.the.warranty.
period,.return.prepaid.with.dated.proof.of.purchase.to:
Jasco.Products.Company
10.E..Memorial.Road
Oklahoma.City,.OK.73114-2205
20
24999
Universal Remote
Instruction Manual
Jasco.Products.Company
10.E..Memorial.Road
Oklahoma.City,.OK.73114-2205
24999-12/10
Made.in.China.
.
21
|
Edimax Technology Switch 5 8 Ports Desktop User Manual
Everpure Water System EV9256 17 User Manual
Excell Precision Scale High Precesion Counting Scale User Manual
Fisher Price Bouncy Seat B8786 User Manual
Fujitsu Printer FTP 631MCL101 User Manual
Gaggenau Oven EB 204 205 User Manual
Garmin Cell Phone 20x 30 User Manual
GE Cooktop JGP656 User Manual
GE Dishwasher GLD4408 User Manual
Gentek Smoke Alarm 9120 User Manual