ADDONICS TECHNOLOGIES
Model: AEUDMACF, AEUDMACFWP (read-only)
ADDONICS TECHNOLOGIES
Model: AEUDMACF, AEUDMACFWP (read-only)
4-Pin Molex
4-Pin Molex
40-Pin IDE
Connector
40-Pin IDE
Connector
Power Connector
Power Connector
Power & drive
activity LED
Master or Slave
Setting
Power & drive
activity LED
Master or Slave
Setting
CF/MD Slot
CF/MD Slot
Step 1 Mount the IDE-CF Adapter PRO on a 3.5” drive bay.
Step 1 Mount the IDE-CF Adapter PRO on a 3.5” drive bay.
Step 2 Connect a 4-pin Molex power cable from the PC power supply to
Step 2 Connect a 4-pin Molex power cable from the PC power supply to
the 4-pin Molex power connector on the IDE-CF Adapter PRO.
the 4-pin Molex power connector on the IDE-CF Adapter PRO.
Step 3 By default, the IDE-CF Adapter PRO is set as a master device. Set
jumper on IDE Master mode or Slave mode (J5 ON = Master, J5 OFF =
Slave)
Step 3 By default, the IDE-CF Adapter PRO is set as a master device. Set
jumper on IDE Master mode or Slave mode (J5 ON = Master, J5 OFF =
Slave)
Step 4 Connect 40-pin IDE connector to IDE controller on motherboard
Step 4 Connect 40-pin IDE connector to IDE controller on motherboard
using IDE flat cable.
using IDE flat cable.
Note:
Note:
The IDE-CF Adapter PRO supports hot swap.
The IDE-CF Adapter PRO supports hot swap.
TECHNICAL SUPPORT (8:30 am to 6:00 pm PST)
TECHNICAL SUPPORT (8:30 am to 6:00 pm PST)
Phone:
Email:
408 453-6212
Phone:
Email:
408 453-6212
|
Motorola Cell Phone 6806800C47B User Manual
Microsoft Visual Studio 2010 Premium Edition 9GD00001 User Manual
LG Electronics LG Lifes Good Cell Phone F6 User Manual
Lenmar Enterprises PowerPort Wave2400 Portable Battery & Charger PPW24 User Manual
Jensen Hello Kitty KT2054 User Manual
ILY Enterprise CoolCopy 3 User Manual
Fujitsu MHV2080AH User Manual
Fujitsu Computer Drive MBB2073RC User Manual
Denon DCD 500AE User Manual
Centon electronic DataStick Bolt 8GBDSB RED User Manual